dpkg/man/dpkg.1

.\" dpkg manual page - dpkg(1)
.\"
.\" Copyright © 1996 Juho Vuori <javuori@cc.helsinki.fi>
.\" Copyright © 1999 Jim Van Zandt <jrv@vanzandt.mv.com>
.\" Copyright © 1999-2003 Wichert Akkerman <wakkerma@debian.org>
.\" Copyright © 2000-2003 Adam Heath <doogie@debian.org>
.\" Copyright © 2002 Josip Rodin
.\" Copyright © 2004-2005 Scott James Remnant <keybuk@debian.org>
.\" Copyright © 2006-2015 Guillem Jover <guillem@debian.org>
.\" Copyright © 2007-2008 Ian Jackson <ian@davenant.greenend.org.uk>
.\" Copyright © 2008-2011 Raphaël Hertzog <hertzog@debian.org>
.\"
.\" This is free software; you can redistribute it and/or modify
.\" it under the terms of the GNU General Public License as published by
.\" the Free Software Foundation; either version 2 of the License, or
.\" (at your option) any later version.
.\"
.\" This is distributed in the hope that it will be useful,
.\" but WITHOUT ANY WARRANTY; without even the implied warranty of
.\" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
.\" GNU General Public License for more details.
.\"
.\" You should have received a copy of the GNU General Public License
.\" along with this program.  If not, see <https://www.gnu.org/licenses/>.
.
.TH dpkg 1 "2014-08-16" "Debian Project" "dpkg suite"
.SH NAME
dpkg \- package manager for Debian
.
.SH SYNOPSIS
.B dpkg
.RI [ option "...] " action
.
.SH WARNING
This manual is intended for users wishing to understand \fBdpkg\fP's
command line options and package states in more detail than that
provided by \fBdpkg \-\-help\fP.

It should \fInot\fP be used by package maintainers wishing to
understand how \fBdpkg\fP will install their packages. The
descriptions of what \fBdpkg\fP does when installing and removing
packages are particularly inadequate.
.
.SH DESCRIPTION
\fBdpkg\fP is a tool to install, build, remove and manage
Debian packages. The primary and more user-friendly
front-end for \fBdpkg\fP is \fBaptitude\fP(1). \fBdpkg\fP itself is
controlled entirely via command line parameters, which consist of exactly
one action and zero or more options. The action-parameter tells \fBdpkg\fP
what to do and options control the behavior of the action in some way.

\fBdpkg\fP can also be used as a front-end to \fBdpkg\-deb\fP(1) and
\fBdpkg\-query\fP(1). The list of supported actions can be found later on
in the \fBACTIONS\fP section. If any such action is encountered \fBdpkg\fP
just runs \fBdpkg\-deb\fP or \fBdpkg\-query\fP with the parameters given
to it, but no specific options are currently passed to them, to use
any such option the back-ends need to be called directly.
.
.SH INFORMATION ABOUT PACKAGES
\fBdpkg\fP maintains some usable information about available
packages. The information is divided in three classes: \fBstates\fP,
\fBselection states\fP and \fBflags\fP. These values are intended to
be changed mainly with \fBdselect\fP.
.SS Package states
.TP
.B not\-installed
The package is not installed on your system.
.TP
.B config\-files
Only the configuration files of the package exist on the system.
.TP
.B half\-installed
The installation of the package has been started, but not completed for
some reason.
.TP
.B unpacked
The package is unpacked, but not configured.
.TP
.B half\-configured
The package is unpacked and configuration has been started, but not yet
completed for some reason.
.TP
.B triggers\-awaited
The package awaits trigger processing by another package.
.TP
.B triggers\-pending
The package has been triggered.
.TP
.B installed
The package is correctly unpacked and configured.
.SS Package selection states
.TP
.B install
The package is selected for installation.
.TP
.B hold
A package marked to be on \fBhold\fP is not handled by \fBdpkg\fP,
unless forced to do that with option \fB\-\-force\-hold\fP.
.TP
.B deinstall
The package is selected for deinstallation (i.e. we want to remove all
files, except configuration files).
.TP
.B purge
The package is selected to be purged (i.e. we want to remove everything
from system directories, even configuration files).
.SS Package flags
.TP
.B reinst\-required
A package marked \fBreinst\-required\fP is broken and requires
reinstallation. These packages cannot be removed, unless forced with
option \fB\-\-force\-remove\-reinstreq\fP.
.
.SH ACTIONS
.TP
\fB\-i\fP, \fB\-\-install\fP \fIpackage-file\fP...
Install the package. If \fB\-\-recursive\fP or \fB\-R\fP option is
specified, \fIpackage-file\fP must refer to a directory instead.

Installation consists of the following steps:
.br

\fB1.\fP Extract the control files of the new package.
.br

\fB2.\fP If another version of the same package was installed before
the new installation, execute \fIprerm\fP script of the old package.
.br

\fB3.\fP Run \fIpreinst\fP script, if provided by the package.
.br

\fB4.\fP Unpack the new files, and at the same time back up the old
files, so that if something goes wrong, they can be restored.
.br

\fB5.\fP If another version of the same package was installed before
the new installation, execute the \fIpostrm\fP script of the old
package. Note that this script is executed after the \fIpreinst\fP
script of the new package, because new files are written at the same
time old files are removed.
.br

\fB6.\fP Configure the package. See \fB\-\-configure\fP for detailed
information about how this is done.
.TP
\fB\-\-unpack \fP\fIpackage-file\fP...
Unpack the package, but don't configure it. If \fB\-\-recursive\fP or
\fB\-R\fP option is specified, \fIpackage-file\fP must refer to a
directory instead.
.TP
\fB\-\-configure \fP\fIpackage\fP...|\fB\-a\fP|\fB\-\-pending\fP
Configure a package which has been unpacked but not yet configured.
If \fB\-a\fP or \fB\-\-pending\fP is given instead of \fIpackage\fP,
all unpacked but unconfigured packages are configured.

To reconfigure a package which has already been configured, try the
.BR dpkg\-reconfigure (8)
command instead.

Configuring consists of the following steps:
.br

\fB1.\fP Unpack the conffiles, and at the same time back up
the old conffiles, so that they can be restored if
something goes wrong.
.br

\fB2.\fP Run \fIpostinst\fP script, if provided by the package.
.TP
\fB\-\-triggers\-only\fP \fIpackage\fP...|\fB\-a\fP|\fB\-\-pending\fP
Processes only triggers (since dpkg 1.14.17).
All pending triggers will be processed.
If package
names are supplied only those packages' triggers will be processed, exactly
once each where necessary. Use of this option may leave packages in the
improper \fBtriggers\-awaited\fP and \fBtriggers\-pending\fP states. This
can be fixed later by running: \fBdpkg \-\-configure \-\-pending\fP.
.TP
\fB\-r\fP, \fB\-\-remove\fP \fP\fIpackage\fP...|\fB\-a\fP|\fB\-\-pending\fP
Remove an installed package. This removes everything except conffiles,
which may avoid having to reconfigure the package if it is reinstalled
later (conffiles are configuration files that are listed in the
\fIDEBIAN/conffiles\fP control file).
If \fB\-a\fP or \fB\-\-pending\fP is given instead of a package name,
then all packages unpacked, but marked to be removed in file
\fI/var/lib/dpkg/status\fP, are removed.

Removing of a package consists of the following steps:
.br

\fB1.\fP Run \fIprerm\fP script
.br

\fB2.\fP Remove the installed files
.br

\fB3.\fP Run \fIpostrm\fP script
.br

.TP
\fB\-P\fP, \fB\-\-purge \fP\fIpackage\fP...|\fB\-a\fP|\fB\-\-pending\fP
Purge an installed or already removed package. This removes everything,
including conffiles.
If \fB\-a\fP or \fB\-\-pending\fP is given instead of a package name,
then all packages unpacked or removed, but marked to be purged in file
\fI/var/lib/dpkg/status\fP, are purged.

Note: some configuration files might be unknown to \fBdpkg\fP because they
are created and handled separately through the configuration scripts. In
that case, \fBdpkg\fP won't remove them by itself, but the package's
\fIpostrm\fP script (which is called by \fBdpkg\fP), has to take care of
their removal during purge. Of course, this only applies to files in
system directories, not configuration files written to individual users'
home directories.

Purging of a package consists of the following steps:
.br

\fB1.\fP Remove the package, if not already removed. See \fB\-\-remove\fP
for detailed information about how this is done.
.br

\fB2.\fP Run \fIpostrm\fP script.
.br
.TP
.BR \-V ", " \-\-verify " [\fIpackage-name\fP...]
Verifies the integrity of \fIpackage-name\fP or all packages if omitted,
by comparing information from the files installed by a package with the
files metadata information stored in the \fBdpkg\fP database
(since dpkg 1.17.2).
The origin
of the files metadata information in the database is the binary packages
themselves. That metadata gets collected at package unpack time during
the installation process.

Currently the only functional check performed is an md5sum verification
against the stored value in the files database. It will only get checked
if the database contains the file md5sum. To check for any missing
metadata in the database, the \fB\-\-audit\fP command can be used.

The output format is selectable with the \fB\-\-verify\-format\fP
option, which by default uses the \fBrpm\fP format, but that might
change in the future, and as such, programs parsing this command
output should be explicit about the format they expect.
.TP
.BR \-\-update\-avail " [\fIPackages-file\fP]"
.TQ
.BR \-\-merge\-avail " [\fIPackages-file\fP]"
Update \fBdpkg\fP's and \fBdselect\fP's idea of which packages are
available. With action \fB\-\-merge\-avail\fP, old information is
combined with information from \fIPackages-file\fP. With action
\fB\-\-update\-avail\fP, old information is replaced with the information
in the \fIPackages-file\fP. The \fIPackages-file\fP distributed with
Debian is simply named \fIPackages\fP. If the \fIPackages-file\fP
argument is missing or named \fB-\fP then it will be read from
standard input (since dpkg 1.17.7). \fBdpkg\fP keeps its record of
available packages in \fI/var/lib/dpkg/available\fP.

A simpler one-shot command to retrieve and update the \fIavailable\fR
file is \fBdselect update\fR. Note that this file is mostly useless
if you don't use \fBdselect\fR but an APT-based frontend: APT has its
own system to keep track of available packages.
.TP
\fB\-A\fP, \fB\-\-record\-avail\fP \fIpackage-file\fP...
Update \fBdpkg\fP and \fBdselect\fP's idea of which packages are
available with information from the package \fIpackage-file\fP. If
\fB\-\-recursive\fP or \fB\-R\fP option is specified, \fIpackage-file\fP
must refer to a directory instead.
.TP
.B \-\-forget\-old\-unavail
Now \fBobsolete\fP and a no-op as \fBdpkg\fP will automatically forget
uninstalled unavailable packages (since dpkg 1.15.4).
.TP
.B \-\-clear\-avail
Erase the existing information about what packages are available.
.TP
.BR \-C ", " \-\-audit " [\fIpackage-name\fP...]
Performs database sanity and consistency checks for \fIpackage-name\fP
or all packages if omitted (per package checks since dpkg 1.17.10).
For example, searches for packages that have been installed only partially
on your system or that have missing, wrong or obsolete control data or
files. \fBdpkg\fP will suggest what to do with them to get them fixed.
.TP
\fB\-\-get\-selections\fP [\fIpackage-name-pattern\fP...]
Get list of package selections, and write it to stdout. Without a pattern,
non-installed packages (i.e. those which have been previously purged) will
not be shown.
.TP
.B \-\-set\-selections
Set package selections using file read from stdin. This file should be
in the format \(lq\fIpackage\fP \fIstate\fP\(rq, where state is one of
\fBinstall\fP, \fBhold\fP, \fBdeinstall\fP or \fBpurge\fP. Blank lines
and comment lines beginning with \(oq#\(cq are also permitted.

The \fIavailable\fP file needs to be up-to-date for this command to be
useful, otherwise unknown packages will be ignored with a warning. See
the \fB\-\-update\-avail\fP and \fB\-\-merge\-avail\fP commands for more
information.
.TP
.B \-\-clear\-selections
Set the requested state of every non-essential package to deinstall
(since dpkg 1.13.18).
This is intended to be used immediately before \fB\-\-set\-selections\fP,
to deinstall any packages not in list given to \fB\-\-set\-selections\fP.
.TP
.B \-\-yet\-to\-unpack
Searches for packages selected for installation, but which for some
reason still haven't been installed.
.TP
.B \-\-add\-architecture \fIarchitecture\fP
Add \fIarchitecture\fP to the list of architectures for which packages can
be installed without using \fB\-\-force\-architecture\fP (since dpkg 1.16.2).
The architecture
\fBdpkg\fP is built for (i.e. the output of \fB\-\-print\-architecture\fP)
is always part of that list.
.TP
.B \-\-remove\-architecture \fIarchitecture\fP
Remove \fIarchitecture\fP from the list of architectures for which packages
can be installed without using \fB\-\-force\-architecture\fP
(since dpkg 1.16.2). If the
architecture is currently in use in the database then the operation will
be refused, except if \fB\-\-force\-architecture\fP is specified. The
architecture \fBdpkg\fP is built for (i.e. the output of
\fB\-\-print\-architecture\fP) can never be removed from that list.
.TP
.B \-\-print\-architecture
Print architecture of packages \fBdpkg\fP installs (for example, \(lqi386\(rq).
.TP
.B \-\-print\-foreign\-architectures
Print a newline-separated list of the extra architectures \fBdpkg\fP is
configured to allow packages to be installed for (since dpkg 1.16.2).
.TP
.B \-\-compare\-versions \fIver1 op ver2\fP
Compare version numbers, where \fIop\fP is a binary operator. \fBdpkg\fP
returns success (zero result) if the specified condition is satisfied,
and failure (nonzero result) otherwise. There are
two groups of operators, which differ in how they treat an empty
\fIver1\fP or \fIver2\fP. These treat an empty version as earlier than any
version: \fBlt le eq ne ge gt\fP. These treat an empty version as later
than any version: \fBlt\-nl le\-nl ge\-nl gt\-nl\fP. These are provided
only for compatibility with control file syntax: \fB< << <= = >= >>
>\fP. The \fB<\fP and \fB>\fP operators are obsolete and should \fBnot\fP
be used, due to confusing semantics. To illustrate: \fB0.1 < 0.1\fP
evaluates to true.
.\" .TP
.\" .B \-\-command\-fd \fIn\fP
.\" Accept a series of commands on input file descriptor \fIn\fP. Note:
.\" additional options set on the command line, and through this file descriptor,
.\" are not reset for subsequent commands executed during the same run.
.TP
.BR \-? ", " \-\-help
Display a brief help message.
.TP
.B \-\-force\-help
Give help about the \fB\-\-force\-\fP\fIthing\fP options.
.TP
.BR \-Dh  ", " \-\-debug=help
Give help about debugging options.
.TP
\fB\-\-version\fP
Display \fBdpkg\fP version information.
.TP
\fBdpkg\-deb actions\fP
See \fBdpkg\-deb\fP(1) for more information about the following actions.

.nf
\fB\-b\fP, \fB\-\-build\fP \fIdirectory\fP [\fIarchive\fP|\fIdirectory\fP]
    Build a deb package.
\fB\-c\fP, \fB\-\-contents\fP \fIarchive\fP
    List contents of a deb package.
\fB\-e\fP, \fB\-\-control\fP \fIarchive\fP [\fIdirectory\fP]
    Extract control-information from a package.
\fB\-x\fP, \fB\-\-extract\fP \fIarchive directory\fP
    Extract the files contained by package.
\fB\-X\fP, \fB\-\-vextract\fP \fIarchive directory\fP
    Extract and display the filenames contained by a
    package.
\fB\-f\fP, \fB\-\-field\fP  \fIarchive\fP [\fIcontrol-field\fP...]
    Display control field(s) of a package.
.BR \-\-ctrl\-tarfile " \fIarchive\fP"
    Output the control tar-file contained in a Debian package.
\fB\-\-fsys\-tarfile\fP \fIarchive\fP
    Output the filesystem tar-file contained by a Debian package.
\fB\-I\fP, \fB\-\-info\fP \fIarchive\fP [\fIcontrol-file\fP...]
    Show information about a package.
.fi

.TP
\fBdpkg\-query actions\fP
See \fBdpkg\-query\fP(1) for more information about the following actions.

.nf

\fB\-l\fP, \fB\-\-list\fP \fIpackage-name-pattern\fP...
    List packages matching given pattern.
\fB\-s\fP, \fB\-\-status\fP \fIpackage-name\fP...
    Report status of specified package.
\fB\-L\fP, \fB\-\-listfiles\fP \fIpackage-name\fP...
    List files installed to your system from \fIpackage-name\fP.
\fB\-S\fP, \fB\-\-search\fP \fIfilename-search-pattern\fP...
    Search for a filename from installed packages.
\fB\-p\fP, \fB\-\-print\-avail\fP \fIpackage-name\fP...
    Display details about \fIpackage-name\fP, as found in
    \fI/var/lib/dpkg/available\fP. Users of APT-based frontends
    should use \fBapt\-cache show\fP \fIpackage-name\fP instead.
.fi
.
.SH OPTIONS
All options can be specified both on the command line and in the \fBdpkg\fP
configuration file \fI/etc/dpkg/dpkg.cfg\fP or fragment files (with names
matching this shell pattern \(aq[0-9a-zA-Z_-]*\(aq) on the configuration
directory \fI/etc/dpkg/dpkg.cfg.d/\fP. Each line in the configuration
file is either an option (exactly the same as the command line option but
without leading hyphens) or a comment (if it starts with a \fB#\fR).
.br
.TP
\fB\-\-abort\-after=\fP\fInumber\fP
Change after how many errors \fBdpkg\fP will abort. The default is 50.
.TP
.BR \-B ", " \-\-auto\-deconfigure
When a package is removed, there is a possibility that another
installed package depended on the removed package. Specifying this
option will cause automatic deconfiguration of the package which
depended on the removed package.
.TP
\fB\-D\fIoctal\fP, \fB\-\-debug=\fP\fIoctal\fP
Switch debugging on. \fIoctal\fP is formed by bitwise-orring desired
values together from the list below (note that these values may change
in future releases). \fB\-Dh\fP or \fB\-\-debug=help\fP display these
debugging values.

    Number   Description
         1   Generally helpful progress information
         2   Invocation and status of maintainer scripts
        10   Output for each file processed
       100   Lots of output for each file processed
        20   Output for each configuration file
       200   Lots of output for each configuration file
        40   Dependencies and conflicts
       400   Lots of dependencies/conflicts output
     10000   Trigger activation and processing
     20000   Lots of output regarding triggers
     40000   Silly amounts of output regarding triggers
      1000   Lots of drivel about e.g. the dpkg/info dir
      2000   Insane amounts of drivel
.TP
.B \-\-force\-\fIthings\fP
.TQ
.BR \-\-no\-force\-\fIthings\fP ", " \-\-refuse\-\fIthings\fP
Force or refuse (\fBno\-force\fP and \fBrefuse\fP mean the same thing)
to do some things. \fIthings\fP is a comma separated list of things
specified below. \fB\-\-force\-help\fP displays a message describing them.
Things marked with (*) are forced by default.

\fIWarning: These options are mostly intended to be used by experts
only. Using them without fully understanding their effects may break
your whole system.\fP

\fBall\fP:
Turns on (or off) all force options.

\fBdowngrade\fP(*):
Install a package, even if newer version of it is already installed.

\fIWarning: At present \fP\fBdpkg\fP\fI does not do any dependency
checking on downgrades and therefore will not warn you
if the downgrade breaks the dependency of some other
package. This can have serious side effects, downgrading
essential system components can even make your whole
system unusable. Use with care.\fP

\fBconfigure\-any\fP:
Configure also any unpacked but unconfigured packages on which the current
package depends.

\fBhold\fP:
Process packages even when marked \(lqhold\(rq.

\fBremove\-reinstreq\fP:
Remove a package, even if it's broken and marked to require
reinstallation. This may, for example, cause parts of the package to
remain on the system, which will then be forgotten by \fBdpkg\fP.

\fBremove\-essential\fP:
Remove, even if the package is considered essential. Essential
packages contain mostly very basic Unix commands. Removing them might
cause the whole system to stop working, so use with caution.

\fBdepends\fP:
Turn all dependency problems into warnings.

\fBdepends\-version\fP:
Don't care about versions when checking dependencies.

\fBbreaks\fP:
Install, even if this would break another package (since dpkg 1.14.6).

\fBconflicts\fP:
Install, even if it conflicts with another package. This is dangerous,
for it will usually cause overwriting of some files.

\fBconfmiss\fP:
If a conffile is missing and the version in the package did change, always
install the missing conffile without prompting. This is dangerous, since
it means not preserving a change (removing) made to the file.

\fBconfnew\fP:
If a conffile has been modified and the version in the package did change,
always install the new version without prompting, unless the
\fB\-\-force\-confdef\fP is also specified, in which case the default
action is preferred.

\fBconfold\fP:
If a conffile has been modified and the version in the package did change,
always keep the old version without prompting, unless the
\fB\-\-force\-confdef\fP is also specified, in which case the default
action is preferred.

\fBconfdef\fP:
If a conffile has been modified and the version in the package did change,
always choose the default action without prompting. If there is no default
action it will stop to ask the user unless \fB\-\-force\-confnew\fP or
\fB\-\-force\-confold\fP is also been given, in which case it will use
that to decide the final action.

\fBconfask\fP:
If a conffile has been modified always offer to replace it with the
version in the package, even if the version in the package did not
change (since dpkg 1.15.8).
If any of \fB\-\-force\-confmiss\fP, \fB\-\-force\-confnew\fP,
\fB\-\-force\-confold\fP, or \fB\-\-force\-confdef\fP is also given,
it will be used to decide the final action.

\fBoverwrite\fP:
Overwrite one package's file with another's file.

\fBoverwrite\-dir\fP
Overwrite one package's directory with another's file.

\fBoverwrite\-diverted\fP:
Overwrite a diverted file with an undiverted version.

\fBunsafe\-io\fP:
Do not perform safe I/O operations when unpacking (since dpkg 1.15.8.6).
Currently this
implies not performing file system syncs before file renames, which is
known to cause substantial performance degradation on some file systems,
unfortunately the ones that require the safe I/O on the first place due
to their unreliable behaviour causing zero-length files on abrupt
system crashes.

\fINote\fP: For ext4, the main offender, consider using instead the
mount option \fBnodelalloc\fP, which will fix both the performance
degradation and the data safety issues, the latter by making the file
system not produce zero-length files on abrupt system crashes with
any software not doing syncs before atomic renames.

\fIWarning: Using this option might improve performance at the cost of
losing data, use with care.\fP

\fBarchitecture\fP:
Process even packages with wrong or no architecture.

\fBbad\-version\fP:
Process even packages with wrong versions (since dpkg 1.16.1).

\fBbad\-path\fP:
\fBPATH\fP is missing important programs, so problems are likely.

\fBnot\-root\fP:
Try to (de)install things even when not root.

\fBbad\-verify\fP:
Install a package even if it fails authenticity check.

.TP
\fB\-\-ignore\-depends\fP=\fIpackage\fP,...
Ignore dependency-checking for specified packages (actually, checking is
performed, but only warnings about conflicts are given, nothing else).
.TP
\fB\-\-no\-act\fP, \fB\-\-dry\-run\fP, \fB\-\-simulate\fP
Do everything which is supposed to be done, but don't write any
changes. This is used to see what would happen with the specified
action, without actually modifying anything.

Be sure to give \fB\-\-no\-act\fP before the action-parameter, or you might
end up with undesirable results. (e.g. \fBdpkg \-\-purge foo
\-\-no\-act\fP will first purge package foo and then try to purge package
\-\-no\-act, even though you probably expected it to actually do nothing)
.TP
\fB\-R\fP, \fB\-\-recursive\fP
Recursively handle all regular files matching pattern \fB*.deb\fP
found at specified directories and all of its subdirectories. This can
be used with \fB\-i\fP, \fB\-A\fP, \fB\-\-install\fP, \fB\-\-unpack\fP and
\fB\-\-avail\fP actions.
.TP
\fB\-G\fP
Don't install a package if a newer version of the same package is already
installed. This is an alias of \fB\-\-refuse\-downgrade\fP.
.TP
.BI \-\-admindir= dir
Change default administrative directory, which contains many files that
give information about status of installed or uninstalled packages, etc.
(Defaults to \fI/var/lib/dpkg\fP)
.TP
.BI \-\-instdir= dir
Change default installation directory which refers to the directory where
packages are to be installed. \fBinstdir\fP is also the directory passed
to \fBchroot\fP(2) before running package's installation scripts, which
means that the scripts see \fBinstdir\fP as a root directory.
(Defaults to \fI/\fP)
.TP
.BI \-\-root= dir
Changing \fBroot\fP changes \fBinstdir\fP to \fIdir\fP and \fBadmindir\fP
to \fIdir\fP\fB/var/lib/dpkg\fP.
.TP
\fB\-O\fP, \fB\-\-selected\-only\fP
Only process the packages that are selected for installation. The
actual marking is done with \fBdselect\fP or by \fBdpkg\fP, when it
handles packages. For example, when a package is removed, it will
be marked selected for deinstallation.
.TP
.BR \-E ", " \-\-skip\-same\-version
Don't install the package if the same version of the package is already
installed.
.TP
.BI \-\-pre\-invoke= command
.TQ
.BI \-\-post\-invoke= command
Set an invoke hook \fIcommand\fP to be run via \*(lqsh \-c\*(rq before or
after the \fBdpkg\fP run for the \fIunpack\fP, \fIconfigure\fP, \fIinstall\fP,
\fItriggers\-only\fP, \fIremove\fP, \fIpurge\fP, \fIadd\-architecture\fP and
\fIremove\-architecture\fP \fBdpkg\fP actions (since dpkg 1.15.4). This
option can be specified multiple times. The order the options are specified
is preserved, with the ones from the configuration files taking precedence.
The environment variable \fBDPKG_HOOK_ACTION\fP is set for the hooks to the
current \fBdpkg\fP action. Note: front-ends might call \fBdpkg\fP several
times per invocation, which might run the hooks more times than expected.
.TP
.BI \-\-path\-exclude= glob-pattern
.TQ
.BI \-\-path\-include= glob-pattern
Set \fIglob-pattern\fP as a path filter, either by excluding or re-including
previously excluded paths matching the specified patterns during install
(since dpkg 1.15.8).

\fIWarning: take into account that depending on the excluded paths you
might completely break your system, use with caution.\fP

The glob patterns use the same wildcards used in the shell, were
\(oq*\(cq matches any sequence of characters, including the empty string
and also \(oq/\(cq.
For example, \(Fo\fI/usr/*/READ*\fP\(Fc matches
\(Fo\fI/usr/share/doc/package/README\fP\(Fc.
As usual, \(oq?\(cq matches any single character (again, including \(oq/\(cq).
And \(oq[\(cq
starts a character class, which can contain a list of characters, ranges
and complementations. See \fBglob\fP(7) for detailed information about
globbing. Note: the current implementation might re-include more directories
and symlinks than needed, to be on the safe side and avoid possible unpack
failures, future work might fix this.

This can be used to remove all paths except some particular ones; a typical
case is:

.nf
.B \-\-path\-exclude=/usr/share/doc/*
.B \-\-path\-include=/usr/share/doc/*/copyright
.fi

to remove all documentation files except the copyright files.

These two options can be specified multiple times, and interleaved with
each other. Both are processed in the given order, with the last rule that
matches a file name making the decision.
.TP
.BI \-\-verify\-format " format-name"
Sets the output format for the \fB\-\-verify\fP command (since dpkg 1.17.2).

The only currently supported output format is \fBrpm\fP, which consists
of a line for every path that failed any check.
The lines start with 9 characters to report each specific check result,
a \(oq\fB?\fP\(cq implies the check could not be done (lack of support,
file permissions, etc), \(oq\fB.\fP\(cq implies the check passed, and
an alphanumeric character implies a specific check failed; the md5sum
verification is denoted with a \(oq\fB5\fP\(cq on the third character.
The line is followed by a space and an attribute character (currently
\(oq\fBc\fP\(cq for conffiles), another space and the pathname.
.TP
\fB\-\-status\-fd \fR\fIn\fR
Send machine-readable package status and progress information to file
descriptor \fIn\fP. This option can be specified multiple times. The
information is generally one record per line, in one of the following
forms:
.RS
.TP
.BI "status: " package ": " status
Package status changed; \fIstatus\fR is as in the status file.
.TP
.BI "status: " package " : error : " extended-error-message
An error occurred. Any possible newlines in \fIextended-error-message\fR
will be converted to spaces before output.
.TP
.BI "status: " file " : conffile\-prompt : '" real-old "' '" real-new "' " useredited " " distedited
User is being asked a conffile question.
.TP
.BI "processing: " stage ": " package
Sent just before a processing stage starts. \fIstage\fR is one of
.BR upgrade ", " install " (both sent before unpacking),"
.BR configure ", " trigproc  ", " disappear ", " remove  ", " purge .
.RE
.TP
\fB\-\-status\-logger\fR=\fIcommand\fR
Send machine-readable package status and progress information to the
shell \fIcommand\fR's standard input (since dpkg 1.16.0).
This option can be specified multiple times.
The output format used is the same as in \fB\-\-status\-fd\fP.
.RE
.TP
\fB\-\-log=\fP\fIfilename\fP
Log status change updates and actions to \fIfilename\fP, instead of
the default \fI/var/log/dpkg.log\fP. If this option is given multiple
times, the last filename is used. Log messages are of the form
\(oqYYYY-MM-DD HH:MM:SS startup \fItype\fP \fIcommand\fP\(cq for each dpkg
invocation where \fItype\fP is \fBarchives\fP (with a \fIcommand\fP of
\fBunpack\fP or \fBinstall\fP) or \fBpackages\fP (with a \fIcommand\fP of
\fBconfigure\fP, \fBtriggers\-only\fP, \fBremove\fP or \fBpurge\fP);
\(oqYYYY-MM-DD HH:MM:SS status \fIstate\fP \fIpkg\fP \fIinstalled-version\fP\(cq
for status change updates;
\(oqYYYY-MM-DD HH:MM:SS \fIaction\fP \fIpkg\fP \fIinstalled-version\fP
\fIavailable-version\fP\(cq for actions where \fIaction\fP is one of
\fBinstall\fP, \fBupgrade\fP, \fBconfigure\fP, \fBtrigproc\fP,
\fBdisappear\fP, \fBremove\fP or \fBpurge\fP; and
\(oqYYYY-MM-DD HH:MM:SS conffile \fIfilename\fP \fIdecision\fP\(cq for conffile
changes where \fIdecision\fP is either \fBinstall\fP or \fBkeep\fP.
.TP
\fB\-\-no\-debsig\fP
Do not try to verify package signatures.
.TP
\fB\-\-no\-triggers\fP
Do not run any triggers in this run (since dpkg 1.14.17), but activations
will still be recorded.
If used with \fB\-\-configure\fP \fIpackage\fP or
\fB\-\-triggers\-only\fP \fIpackage\fP then the named package postinst
will still be run even if only a triggers run is needed. Use of this option
may leave packages in the improper \fBtriggers\-awaited\fP and
\fBtriggers\-pending\fP states. This can be fixed later by running:
\fBdpkg \-\-configure \-\-pending\fP.
.TP
\fB\-\-triggers\fP
Cancels a previous \fB\-\-no\-triggers\fP (since dpkg 1.14.17).
.
.SH ENVIRONMENT
.TP
.B PATH
This variable is expected to be defined in the environment and point to
the system paths where several required programs are to be found. If it's
not set or the programs are not found, \fBdpkg\fP will abort.
.TP
.B HOME
If set, \fBdpkg\fP will use it as the directory from which to read the user
specific configuration file.
.TP
.B TMPDIR
If set, \fBdpkg\fP will use it as the directory in which to create
temporary files and directories.
.TP
.B PAGER
The program \fBdpkg\fP will execute when displaying the conffiles.
.TP
.B SHELL
The program \fBdpkg\fP will execute when starting a new shell.
.TP
.B COLUMNS
Sets the number of columns \fBdpkg\fP should use when displaying formatted
text. Currently only used by \-l.
.TP
.B DPKG_SHELL_REASON
Defined by \fBdpkg\fP on the shell spawned on the conffile prompt to
examine the situation (since dpkg 1.15.6).
Current valid value: \fBconffile\-prompt\fP.
.TP
.B DPKG_CONFFILE_OLD
Defined by \fBdpkg\fP on the shell spawned on the conffile prompt to
examine the situation (since dpkg 1.15.6).
Contains the path to the old conffile.
.TP
.B DPKG_CONFFILE_NEW
Defined by \fBdpkg\fP on the shell spawned on the conffile prompt to
examine the situation (since dpkg 1.15.6).
Contains the path to the new conffile.
.TP
.B DPKG_RUNNING_VERSION
Defined by \fBdpkg\fP on the maintainer script environment to the
version of the currently running \fBdpkg\fP instance (since dpkg 1.14.17).
.TP
.B DPKG_MAINTSCRIPT_PACKAGE
Defined by \fBdpkg\fP on the maintainer script environment to the
(non-arch-qualified) package name being handled (since dpkg 1.14.17).
.TP
.B DPKG_MAINTSCRIPT_PACKAGE_REFCOUNT
Defined by \fBdpkg\fP on the maintainer script environment to the
package reference count, i.e. the number of package instances with
a state greater than \fBnot\-installed\fP (since dpkg 1.17.2).
.TP
.B DPKG_MAINTSCRIPT_ARCH
Defined by \fBdpkg\fP on the maintainer script environment to the
architecture the package got built for (since dpkg 1.15.4).
.TP
.B DPKG_MAINTSCRIPT_NAME
Defined by \fBdpkg\fP on the maintainer script environment to the
name of the script running, one of \fBpreinst\fP, \fBpostinst\fP,
\fBprerm\fP or \fBpostrm\fP (since dpkg 1.15.7).
.
.SH FILES
.TP
.I /etc/dpkg/dpkg.cfg.d/[0-9a-zA-Z_-]*
Configuration fragment files (since dpkg 1.15.4).
.TP
.I /etc/dpkg/dpkg.cfg
Configuration file with default options.
.TP
.I /var/log/dpkg.log
Default log file (see \fI/etc/dpkg/dpkg.cfg\fP(5) and option
\fB\-\-log\fP).
.P
The other files listed below are in their default directories, see option
\fB\-\-admindir\fP to see how to change locations of these files.
.TP
.I /var/lib/dpkg/available
List of available packages.
.TP
.I /var/lib/dpkg/status
Statuses of available packages. This file contains information about
whether a package is marked for removing or not, whether it is
installed or not, etc. See section \fBINFORMATION ABOUT PACKAGES\fP
for more info.

The status file is backed up daily in \fI/var/backups\fP. It can be
useful if it's lost or corrupted due to filesystems troubles.
.P
The following files are components of a binary package. See \fBdeb\fP(5)
for more information about them:
.RS
.nf
.I control
.I conffiles
.I preinst
.I postinst
.I prerm
.I postrm
.I triggers
.fi
.RE
.
.SH BUGS
\fB\-\-no\-act\fP usually gives less information than might be helpful.
.
.SH EXAMPLES
To list installed packages related to the editor \fBvi\fP(1) (note that
\fBdpkg\-query\fP does not load the \fIavailable\fP file anymore by
default, and the \fBdpkg\-query\fP \fB\-\-load\-avail\fP option should
be used instead for that):
.br
\fB     dpkg \-l \(aq*vi*\(aq\fP
.br

To see the entries in \fI/var/lib/dpkg/available\fP of two packages:
.br
\fB     dpkg \-\-print\-avail elvis vim | less\fP
.br

To search the listing of packages yourself:
.br
\fB     less /var/lib/dpkg/available\fP
.br

To remove an installed elvis package:
.br
\fB     dpkg \-r elvis\fP
.br

To install a package, you first need to find it in an archive or
CDROM. The \fIavailable\fP file shows that the vim package is in section
\fBeditors\fP:
.br
\fB     cd /media/cdrom/pool/main/v/vim\fP
\fB     dpkg \-i vim_4.5\-3.deb\fP
.br

To make a local copy of the package selection states:
.br
\fB     dpkg \-\-get\-selections >myselections\fP
.br

You might transfer this file to another computer, and after having updated
the \fIavailable\fP file there with your package manager frontend of choice
(see https://wiki.debian.org/Teams/Dpkg/FAQ for more details), for example:
.br
\fB     apt\-cache dumpavail | dpkg \-\-merge\-avail\fP
.br
or with dpkg 1.17.6 and earlier:
.br
\fB     avail=`mktemp`\fP
\fB     apt\-cache dumpavail >"$avail"\fP
\fB     dpkg \-\-merge\-avail "$avail"\fP
\fB     rm "$avail"\fP
.br
you can install it with:
.br
\fB     dpkg \-\-clear\-selections\fP
\fB     dpkg \-\-set\-selections <myselections\fP
.br

Note that this will not actually install or remove anything, but just
set the selection state on the requested packages. You will need some
other application to actually download and install the requested
packages. For example, run \fBapt\-get dselect\-upgrade\fP.

Ordinarily, you will find that \fBdselect\fP(1) provides a more
convenient way to modify the package selection states.
.br
.
.SH ADDITIONAL FUNCTIONALITY
Additional functionality can be gained by installing any of the
following packages: \fBapt\fR, \fBaptitude\fR and \fBdebsums\fR.
.
.SH SEE ALSO
.ad l
.nh
\fBaptitude\fP(1),
\fBapt\fP(1),
\fBdselect\fP(1),
\fBdpkg\-deb\fP(1),
\fBdpkg\-query\fP(1),
\fBdeb\fP(5),
\fBdeb\-control\fP(5),
\fBdpkg.cfg\fP(5),
and
\fBdpkg\-reconfigure\fP(8).
.
.SH AUTHORS
See \fI/usr/share/doc/dpkg/THANKS\fP for the list of people who have
contributed to \fBdpkg\fP.